Version 6.5.1
Bluebeam PDF Revu Silent Install
The version 6.5.1 netdeploy installation files are now available for download.
Detailed instructions and options for completing the installation are described in the Readme file that is included
in the download. That document describes the steps required for performing a silent installation of Bluebeam PDF
Revu. The procedures defined in this document can be used in order to perform remote and automated installations for
the Bluebeam Suite of products. The steps below need to be run as Administrator. This procedure has been tested in
the Windows 2000, Windows XP and Windows Vista environments. The target computers should have access
to the Internet to complete the automated authorization process.
32-bit InstallShield version for Windows 2000, XP and Vista:
http://www.bluebeam.com/bbnetdeploy
64-bit InstallShield version for Windows XP x64 and Vista x64:
http://www.bluebeam.com/bbnetdeploy64bit
32-bit MSI version for Windows 2000, XP and Vista:
http://www.bluebeam.com/MSIdeploy
64-bit MSI version for Windows XP x64 and Vista x64:
http://www.bluebeam.com/MSIdeploy64bit
Version 6.5.0
Bluebeam PDF Revu Silent Install
The version 6.5.0 netdeploy installation files are now available for download.
Detailed instructions and options for completing the installation are described in the Readme file that is included
in the download. That document describes the steps required for performing a silent installation of Bluebeam PDF
Revu. The procedures defined in this document can be used in order to perform remote and automated installations for
the Bluebeam Suite of products. The steps below need to be run as Administrator. This procedure has been tested in
the Windows 2000, Windows XP and Windows Vista environments. The target computers should have access to the Internet
to complete the automated authorization process.
32-bit InstallShield version for Windows 2000, XP and Vista:
http://www.pdfdesktop.com/downloads/650/BBPDFRevu650NetDeploy.zip
64-bit InstallShield version for Windows XP x64 and Vista x64:
http://www.pdfdesktop.com/downloads/650/BBPDFRevu650x64NetDeploy.zip
Version 6.2.0
Bluebeam PDF Revu Silent Install
The version 6.2.0 netdeploy installation files are now available for download.
Detailed instructions and options for completing the installation are described in the Readme file that is included
in the download.
That document describes the steps required for performing a silent installation of Bluebeam PDF Revu. The procedures
defined in this document can be used in order to perform remote and automated installations for the Bluebeam Suite
of products. The steps below need to be run as Administrator. This procedure has been tested in the Windows 2000,
Windows XP and Windows Vista environments. The target computers should have access to the Internet to
complete the automated authorization process.
32-bit InstallShield version for Windows 2000, XP and Vista:
http://www.pdfdesktop.com/downloads/620/BBPDFRevu620NetDeploy.zip
64-bit InstallShield version for Windows XP x64 and Vista x64:
http://www.pdfdesktop.com/downloads/620/BBPDFRevu620x64NetDeploy.zip
Version 6.0.1
Bluebeam PDF Revu Silent Install
This document describes the steps required for performing a silent installation of Bluebeam PDF Revu. The procedures
defined in this document can be used in order to perform remote and automated installations for the Bluebeam Suite
of products. The steps below need to be run as Administrator. This procedure has been tested in the Windows 2000,
Windows XP and Windows Vista environments. The target computers should have access to the Internet to complete the automated
authorization process.
Before the Bluebeam Software can be deployed, the Windows installer version 3.1 and Microsoft .NET Framework version
2.0 need to reside on the target computer. Step 2 and Step 3 below provide instructions for running these installs.
The version 6.0.1 netdeploy installation file for 32-bit versions of Windows can be downloaded from
http://www.pdfdesktop.com/downloads/601b/BBPDFRevu601NetDeploy.zip
Step #1). Setup
It is suggested that you copy the files from this CD to a location where the below programs can be accessed by the
deployment software. For the purpose of this example, we will place these files on an example network drive:
g:\bb
Step #2). Run the Windows 3.1 Installer
Included on the Network Deploy CD/download is the Windows Install 3.1 executable
"WindowsInstaller-KB893803-v2-x86.exe"
Issue the following command:
WindowsInstaller-KB893803-v2-x86.exe /help
to see the options available options for executing. In order to perform a silent install, it is recommended that you
run the installation the installer using the following command:
WindowsInstaller-KB893803-v2-x86.exe /quiet
You can force a reboot after the install is completed by using the following command line:
WindowsInstaller-KB893803-v2-x86.exe /quiet /forcerestart
Step #3). Install the Microsoft .NET Framework
A prerequisite for Bluebeam PDF Revu is that the Microsoft .NET Framework, version 2.0 be installed on the target
computer. The CD contains the Microsoft .NET re-distributable package (dotnetfx.exe). You can run this program in a
silent manner using the following method.
Command: dotnetfx.exe
Parameters: /q /c:"install /q"
Example command line: G:\bb\dotnetfx.exe /q /c:"install /q"
Step #4). Install Bluebeam PDF Revu Application
There are several parameters that can optionally be configured:
-
SN - Indicate the Serial Number to use for rolling out the software. This parameter should be used with
the PK parameter
-
PK - Product Key to use for Rolling out the software. This parameter should be used with the SN
parameter.
-
PS - Page Size parameter to is for the default. Valid options are "A4" and "Letter"
-
NC - Network configuration path. Setting this option enables centralizing in one network location all of
the Bluebeam settings for your company.
-
JO - Job Options path. Setting this option will replace default versions of .JobOptions files during
installation. Note that the files must not be
read-only, and must be contained in valid sub-folders (such as "Printer Driver" or "AutoCAD.Plugin"). It is
not necessary to include a complete set of files.
-
RP - Revu Preferences path. Setting this option will deploy a Revu Preferences file (exported from the
Preferences dialog). Include absolute path.
There are also several Installation flags which can optionally be set to override default behavior:
-
DEFAULTVIEWER - Set to "dvoff" to avoid setting Bluebeam PDF Revu as the default .pdf file viewer.
-
DESKSHORTCUT - Set to "0" to avoid putting a Bluebeam PDF Revu shortcut on the desktop.
-
DESKSTAPLER - Set to "1" to put a Bluebeam Stapler shortcut on the desktop.
Running the setup with the below command parameters perform a silent installation and registration of Bluebeam PDF
Revu.
Command: BbPDFRevuSetup6xx.exe
Parameters:/z"/SN:{Serial Number} /PK:{Product Key} /NC:{Network Path}" /s
/f1"{dir}\setup.iss"
Note: The Product Key MUST be in uppercase.
Example command lines:
For the below examples, replace the Serial Number and Product Key with those sent to you in your License Key e-mail.
Runs a basic silent install:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999 /PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies an A4 default page size for the Bluebeam Printer:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /PS:A4" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies a central location (u:\\bb-config) for Bluebeam settings:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /NC:u:\bb-config" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies not making Revu the default PDF viewer:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss" /V"DEFAULTVIEWER=dvoff"
Runs a basic silent install and specifies not making Revu the default PDF viewer, and not placing a shortcut for
Revu on the desktop:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss" /V"DEFAULTVIEWER=dvoff DESKSHORTCUT=0"
Runs a basic silent install and specifies not making Revu the default PDF viewer, and placing a shortcut for Stapler
on the desktop:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss" /V"DEFAULTVIEWER=dvoff DESKSTAPLER=1"
Runs a basic silent install and specifies a folder with some replacement .JobOptions files:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /JO:g:\bb\joboptions" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies a Revu Preferences file to be deployed:
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /RP:g:\bb\RevuPreferences.xml" /s /f1"g:\bb\setup.iss"
Installs both prerequisites, and runs a basic silent install:
G:\bb\WindowsInstaller-KB893803-v2-x86.exe /quiet /forcerestart
G:\bb\dotnetfx.exe /q /c:"install /q"
G:\bb\BbPDFRevuSetup601.exe /z"/SN:9999999 /PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss"
Notes for organizations using SMS
-
If you are performing the install as a user different than the currently logged-in user, you may need to specify
the "runas" command as demonstrated in the below sample:
G:\bb\BbPDFRevuSetup600.exe /runas /z"/SN:{your SN} /PK:{Your PK}" /s /f1"C:\bb\setup.iss"
-
A Package Definition File has been included with the distribution. Please review the file and make any
necessary changes need for your particular organization.
Step #5). Start AutoCAD/SolidWorks on Target Workstation
To verify that the installation completed successfully, run installation as a user on the target computer. You may
see a temporary message displayed on the workstation, which says "Authorization successful" indicating that an
authorization was obtained from the Bluebeam Authorization Code servers. The installation is now complete and
successful.
For additional information about the Microsoft .NET Framework see the following links:
Microsoft .NET Framework Technology overview
http://msdn.microsoft.com/netframework/technologyinfo/overview/
Download the .NET Framework 2.0 from Microsoft
http://www.microsoft.com/downloads/details.aspx?familyid=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en
Version 6.0.1 - 64-bit
Bluebeam PDF Revu Silent Install
This document describes the steps required for performing a silent installation of Bluebeam PDF Revu. The procedures
defined in this document can be used in order to perform remote and automated installations for the Bluebeam Suite
of products. The steps below need to be run as Administrator. This procedure has been tested in the
Windows XP x64 and Windows Vista 64-bit environments. The target computers should have access to the Internet to complete the automated
authorization process.
Before the Bluebeam Software can be deployed, the Windows Installer version 3.1 and Microsoft .NET Framework version
2.0 need to reside on the target computer. Step 2 and Step 3 below provide instructions for running these installs.
The version 6.0.1 netdeploy installation file for Windows XP x64 and Windows Vista 64-bit can be downloaded from
http://www.bluebeam.com/bbnetdeploy64bit
Step #1). Setup
It is suggested that you copy the files from this CD to a location where the below programs can be accessed by the
deployment software. For the purpose of this example, we will place these files on an example network drive:
g:\bb
Step #2). Run the Windows 3.1 Installer
This step is not required for the 64-bit version.
Step #3). Install the Microsoft .NET Framework
A prerequisite for Bluebeam PDF Revu is that the Microsoft .NET Framework version 2.0 be installed on the target
computer. The CD contains the Microsoft .NET redistributable package (NetFx64.exe). You can run this program in a
silent manner using the following method.
Command: NetFx64.exe
Parameters: /q /c:"install /q"
Example command line: G:\bb\NetFx64 /q /c:"install /q"
Step #4). Install Bluebeam PDF Revu Application
There are several parameters that can optionally be configured:
-
SN - Indicate the Serial Number to use for rolling out the software. This parameter should be used with
the PK parameter
-
PK - Product Key to use for Rolling out the software. This parameter should be used with the SN
parameter.
-
PS - Page Size parameter to is for the default. Valid options are "A4" and "Letter"
-
NC - Network configuration path. Setting this option enables centralizing in one network location all of
the Bluebeam settings for your company.
-
JO - Job Options path. Setting this option will replace default versions of .JobOptions files during
installation. Note that the files must not be
read-only, and must be contained in valid sub-folders (such as "Printer Driver" or "AutoCAD.Plugin"). It is
not necessary to include a complete set of files.
-
RP - Revu Preferences path. Setting this option will deploy a Revu Preferences file (exported from the
Preferences dialog). Include absolute path.
There are also several Installation flags which can optionally be set to override default behavior:
-
DEFAULTVIEWER - Set to "dvoff" to avoid setting Bluebeam PDF Revu as the default .pdf file viewer.
-
DESKSHORTCUT - Set to "0" to avoid putting a Bluebeam PDF Revu shortcut on the desktop.
-
DESKSTAPLER - Set to "1" to put a Bluebeam Stapler shortcut on the desktop.
Running the setup with the below command parameters perform a silent installation and registration of Bluebeam PDF
Revu.
Command: BbPDFRevuSetup601x64.exe
Parameters:/z"/SN:{Serial Number} /PK:{Product Key} /NC:{Network Path}" /s
/f1"{dir}\setup.iss"
Note: The Product Key MUST be in uppercase.
Example command lines:
For the below examples, replace the Serial Number and Product Key with those sent to you in your License Key e-mail.
Runs a basic silent install:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999 /PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies an A4 default page size for the Bluebeam Printer:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /PS:A4" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies a central location (u:\\bb-config) for Bluebeam settings:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /NC:u:\bb-config" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies not making Revu the default PDF viewer:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss" /V"DEFAULTVIEWER=dvoff"
Runs a basic silent install and specifies not making Revu the default PDF viewer, and not placing a shortcut for
Revu on the desktop:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss" /V"DEFAULTVIEWER=dvoff DESKSHORTCUT=0"
Runs a basic silent install and specifies not making Revu the default PDF viewer, and placing a shortcut for Stapler
on the desktop:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss" /V"DEFAULTVIEWER=dvoff DESKSTAPLER=1"
Runs a basic silent install and specifies a folder with some replacement .JobOptions files:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /JO:g:\bb\joboptions" /s /f1"g:\bb\setup.iss"
Runs a basic silent install and specifies a Revu Preferences file to be deployed:
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999
/PK:XXXXX-YYYYYYY /RP:g:\bb\RevuPreferences.xml" /s /f1"g:\bb\setup.iss"
Installs both prerequisites, and runs a basic silent install:
G:\bb\NetFx64.exe /q /c:"install /q"
G:\bb\BbPDFRevuSetup601x64.exe /z"/SN:9999999 /PK:XXXXX-YYYYYYY" /s /f1"g:\bb\setup.iss"
Notes for organizations using SMS
-
If you are performing the install as a user different than the currently logged-in user, you may need to specify
the "runas" command as demonstrated in the below sample:
G:\bb\BbPDFRevuSetup601x64.exe /runas /z"/SN:{your SN} /PK:{Your PK}" /s /f1"C:\bb\setup.iss"
-
A Package Definition File has been included with the distribution. Please review the file and make any
necessary changes need for your particular organization.
Step #5). Start AutoCAD/SolidWorks on Target Workstation
To verify that the installation completed successfully, run installation as a user on the target computer. You may
see a temporary message displayed on the workstation, which says "Authorization successful" indicating that an
authorization was obtained from the Bluebeam Authorization Code servers. The installation is now complete and
successful.
For additional information about the Microsoft .NET Framework see the following links:
Microsoft .NET Framework Technology overview
http://msdn.microsoft.com/netframework/technologyinfo/overview/
Download the Microsoft .NET Framework 2.0 x64
http://www.microsoft.com/downloads/details.aspx?FamilyID=b44a0000-acf8-4fa1-affb-40e78d788b00&displaylang=en
|
